FAQ:Accessing Functions above F9 with an NCE Power Cab
DCCWiki, a community DCC encyclopedia.
| See more FAQs | |
|---|---|
| General information | |
| DCC Categories | Throttle |
| Related Articles: | |
| Manufacturers | |
The NCE Power Cab can access functions above F9. It involves a few more button presses.
The expanded functions only work with upgraded throttle firmware. See Power Cab Firmware for more details.
- F10 – F19
- Press and hold Shift
- While holding the shift key press 0
- The display will show F10 – F19
- To access a function in this range, subtract 10 from the function number and press the corresponding key. For F19, press 9.
- F10 – F12 can also be activated by pressing SHIFT and the related key at the bottom of the keypad.
- F20 – F28
- Press and hold Shift
- While holding the shift key press 0 twice.
- The display will show F20 – F28
- Pressing 5 activates F25 for example.
- Viewing Active Functions
- Press the EXPN key.
- Three rows will appear on the display indicating which range and the functions active in that range.
- PROG/ESC returns to the main screen.
See Power Cab Tips for additional details