ECoSBoost 50012
Booster: ECoSBoost 50012 Summary: ECoSBoost with 7.0A continuous output and power supply 120-240VA with terminals for track and programming connection. Includes extensive instruction manual.
| See more Boosters | |
|---|---|
| |
| General information | |
| Manufacturer | Electronic Solutions Ulm |
| MSRP | |
| Manufacturer Part Number | |
| Common Name | |
| UPC Number | |
| Release information | |
| Product URL | |
| Manual URL | Manual Link |
| Has computer interface | |
| Firmware Upgrade Possible | Yes |
| Year Released | |
| Year EOL | |
| Predecessor | |
| Successor | |
| Details | |
| Max Current | 7 |
| Continuous Current | 7 |
| Auto Reverse | |
| Optoisolated | |
| Throttle Network | |
| Input Power Waveform | |
| Input VoltRange | |
| Output Volt Range | |
Description
Booster with 7.0 A continuous-load output. Outputs short circuit proof. Thermal overload protection. Galvanically isolated EcoSlink connection. Integrated NMRA DCC BiDirection feedback detector with cutout device. The track outlet is protected against overload as well as short circuits. Integrated mfx feedback device (Enabled only when used together with Marklin central station).
The operational software of each, in an ECoSBoost integrated micro controller, can be updated.
Operational modes
The ECoSBoost is connected directly to the ECoSlink jack, from where it gets its control signals. Basically it is capable of amplifying and delivering to the track these data formats: DCC, Motorola, Selectrix® and mfx®.
Models Replaced
This version replaces the 50010 4amp and 50011 8amp models which have been discountinued.
ECoSBoost 50012 FAQs
- No FAQs link to this page.
See Also
References this product
Electronic Solutions Ulm Boosters
No other Boosters found. Feel free to add one.