Product: ECos 50200
|There is a full list of command stations available. For help with terms, see the Terms List.|
|Common Name||ECoS 50200||Manufacturer||ESU|
|Product URL||http://www.esu.eu/en/products/digital-control/ecos-50200-dcc-system/what-ecos-can-do/||Manual URL|
|Integrated Throttle||Knobs and Buttons||Max Current||4|
|Computer Interface||Yes||Software Upgrade Possible||Yes|
|Communications BUS||CAN Bus||Firmware Upgrade Possible|
|Separate Programming Track||Yes|
|Address Range||2/4||Max Simultaneous Trains||16384|
|Support Consisting||Basic||Max Consists||1|
|Speed Steps||128||Max Switches||1,420|
|Zero Stretching||Ops Mode Programming||true|
|Auto Shuffle Train / Signal Speed Control||Yes||LocoNumberReadback||Yes|
- Unit must be returned to manufacturer for updating.
- Older units do not support functions F9 – F12
What references this product
Other Command Stations made by same manufacturer
The ECoS 50200 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.
As a multi-protocol command station, ECoS supports DCC, Märklin® Motorola®, Selectrix® and the M4 data protocol. M4 drives and controls locomotives equipped with mfx® decoders without any restrictions. M4 is completely compatible. You can even continue to use almost all of your present loco decoders. ECoS is therefore the only digital command station worldwide that unifies 4 data protocols.