Product: MX1HS
DCCWiki, a community DCC encyclopedia.
 |
There is a full list of command stations available. For help with terms, see the Terms List. |
| ||||||||
Specifications
| General information | |||
|---|---|---|---|
| Common Name | MX1HS High Output | Manufacturer | Zimo |
| Product URL | http://www.zimo.at | Manual URL | |
| Integrated Throttle | None | Max Current | 16 |
| Computer Interface | Yes | Software Upgrade Possible | Yes |
| Communications BUS | CAN Bus | Firmware Upgrade Possible | Yes |
| Separate Programming Track | Yes | ||
| DCC Features | |||
| Address Range | 2/4 | Max Simultaneous Trains | |
| Support Consisting | Max Consists | ||
| Speed Steps | Max Switches | ||
| Functions | Feedback | ||
| Zero Stretching | No | Ops Mode Programming | |
| Auto Shuffle Train / Signal Speed Control | Yes | LocoNumberReadback | |
| CV Readback | |||
What references this product
None yet.
Other Command Stations made by same manufacturer
This unit features 2 times 8A track connections, one can be configured as a program track.
Up to 2 x 8A of track power at two equal track outputs, independently adjustable track voltage, parallel connection of both track outputs is possible (16A); one output may serve the programming track. Otherwise identical to MX1 with the same software; configurable with jumpers for the use as a large booster MXBOO (as slave unit of another command station with 2 x 8A).