FAQ:What does error 02 mean on my Lenz command station?
DCCWiki, a community DCC encyclopedia.
See more FAQs | |
---|---|
General information | |
DCC Categories | Command Station |
Related Articles: | |
Manufacturers |
When Error 02 occurs while programming it indicates that the command station did not receive a response from the decoder. Most decoders will briefly energize the motor to indicate the command has been received. The command station can detect that.
- Troubleshooting
If an Error 02 is occurring, check the following items:
- Connection from the command station to the programming track.
- If a newly wired programming track, verify the connections to the programming track.
- Verify the decoder is wired correctly (if recently installed).
- Check the electrical connections between the wheels and the decoder.
- Is the locomotive close to the programming track's feeders?
- Are the track and wheels clean?