Standard+ Decoder (10231-1)

DCCWiki, a community DCC encyclopedia.
Jump to: navigation, search

Multifunction Decoder:

Lenz: Standard+ Decoder (10231-1)

Summary: Lenz Standard V1 HO decoder with 3 functions. Suitable for all DC locomotives with a continuous current draw of 1.0 Amp. or less.

See more Multifunction Decoders
General information
Manufacturer Lenz
CV7 ID# 93
Compare Prices Latest Prices
Product information
Part Number

Common Name Standard+ Decoder
Decoder Core Features Functions, Lights

Product Manual File File Link
Year Released 07/2007
Successor 10231-2
Hardware Information
Scales HO
Connection Method 8 Pin / NEM652
Length 2525 cm <br />250 mm <br />0.25 m <br />9.843 in <br />0.82 ft <br />
Width 15.415.4 cm <br />154 mm <br />0.154 m <br />6.063 in <br />0.505 ft <br />
Height 3.33.3 cm <br />33 mm <br />0.033 m <br />1.299 in <br />0.108 ft <br />
Continuous Amps 1
Max Amps 1
Voltage Range
General DCC Information
Extended Addressing Yes
AnalogConversion Yes
Speed Steps 14, 28/128
User Loadable Speed Table Yes
Back EMF Yes
Programming Modes Ops, Address, Direct, Paged, Register
Decoder Assisted Consists Yes
CV Readback
Silent Running (HF) Yes
Kick Start
Momentum Yes
Function Information
# of Functions 10
Function Amps 100mA
# of Lighting Effects 10
# of Sound Effects 0
Programming Information
Programming Lock Yes
Decoder Programming Modes
Misc Items
SUSI Interface
Has computer interface
Firmware Upgrade Possible No
UPC Number


Decoder manual is dated July 2007.

Standard Silent-Back EMF DCC Decoder


  • Super smooth and silent high frequency Back EMF motor control.
  • Adjustable precision stopping control
  • Low speed gear for switching operations
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max, > 5 A stall.
  • Motor and function outputs protected
  • Three function outputs rated at 100mA each with advanced function mapping.
  • Total current for all functions shall now exceed 600mA.
  • Directional or independent lighting with dimming and special effects.
  • Support for Advanced Consist Control and Extended Addressing
  • Support for programming on the mainline (operations mode programming)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • Supports service mode decoder lock

Motor Drive Frequency is 19 or 23kHz.

Decoder Reset: Write a value of 33 in CV8. Software revision is found in CV128.

10231-1 FAQs

  • No FAQs link to this page.

See Also

Articles Referencing this Page

See more results...

Related Lenz Multifunction Decoders