Digitrax: DB210 (DB210)
Booster:
Digitrax: DB210 (DB210)Summary: The DB210 boosters can out up to 8 Amps of power and has a voltage selector for various layout scales. This booster does not include a power supply. It accepts a DC voltage range between 13.8 to 24v. When using common rail wiring, use the DB210 Opto model instead. These 2 models are nearly identical, except for the opto isolation for common rail.
| See more Boosters | |
|---|---|
| |
| General information | |
| Manufacturer | Digitrax |
| MSRP | 159.99 USD162.87 EUR <br />142.50 GBP <br />241.79 AUD <br />215.84 CAD <br /> |
| Check Prices | Latest Prices |
| Manufacturer Part Number | |
| Common Name | DB210 |
| UPC Number | |
| Release information | |
| Product URL | Product Link |
| Manual URL | Manual Link |
| Has computer interface | |
| Firmware Upgrade Possible | Yes |
| Year Released | 2017 |
| Year EOL | |
| Predecessor | DB150 |
| Successor | |
| Details | |
| Max Current | 8 |
| Continuous Current | |
| Auto Reverse | Yes |
| Optoisolated | Yes |
| Throttle Network | LocoNet |
| Input Power Waveform | DC |
| Input VoltRange | 13.8-24VDC |
| Output Volt Range | |
Decription
The DB210 (and the nearly identical DB210-Opto boosters are add-on components for existing Digitrax managed layouts. This booster allows for up to 8 amps of output. With a flip of a switch, the booster can be set to 3, 5, or 8 amps output. The primary difference between the DB210 and DB210 Opto is the opto-isolation capabilities for common rail wiring, however, for DCC, it's recommended to not use common rail wiring.
In addition to the DB210, a DC power supply is required. The DB210 can accept DC input from 13.8v to 24v, with amp requirements of 3, 5, or 8 amps, depending on what has been selected as the output current capability. Although the mfr recommends the use of their power supplies, and stable high-quality DC power supply will work fine.
For more capacity, also consider the [[DB220|DB220/DB
DB210 FAQs
- No FAQs link to this page.