Product: DB150
DCCWiki, a community DCC encyclopedia.
(Redirected from DB150)
 |
There is a full list of command stations available. For help with terms, see the Terms List. |
Contents
Specifications
| General information | |||
|---|---|---|---|
| Common Name | Genesis/Empire Builder | Manufacturer | Digitrax |
| Product URL | http://digitrax.com | Manual URL | |
| Integrated Throttle | None | Max Current | 5 |
| Computer Interface | No | Software Upgrade Possible | No |
| Communications BUS | LocoNet | Firmware Upgrade Possible | Yes |
| Separate Programming Track | No | ||
| DCC Features | |||
| Address Range | 2/4 | Max Simultaneous Trains | 22 |
| Support Consisting | Universal, Advanced | Max Consists | |
| Speed Steps | 128 | Max Switches | 2,048 |
| Functions | 30 | Feedback | |
| Zero Stretching | Yes | Ops Mode Programming | true |
| Auto Shuffle Train / Signal Speed Control | LocoNumberReadback | No | |
| CV Readback | No | ||
Notes
What references this product
None yet.
Other Command Stations made by same manufacturer
| ||||||||
- Full LocoNet Capability
- Run up to 22 locomotives and 22 throttles in command station mode.
- Provides additional power to run more trains in booster mode.
- Can be used as an Intelligent Auto Reversing Booster
- Broadcast write only programmer
- 5 Amp Booster, 80VA.
- Many options are user customizable.
- Overheat, over voltage & short circuit protection.
- Selectable output for N, HO, and large-scale layouts
- Track Status indicator shows voltage and signal type (DCC or Zero Stretch Analog Signal for conventional operation.)
- Stabilized Track Drive Output.