PH Pro (5240001)
Starter Set by NCE:
PH Pro (5240001) |
This item has been replaced by PH5 |
Summary: The Power Pro is an Advanced Starter Set from NCE, available with tethered or radio throttles.
| See more Start Sets | |
|---|---|
| |
| General information | |
| Manufacturer | NCE
|
| MSRP | 679.95 USD692.19 EUR <br />605.63 GBP <br />1,027.61 AUD <br />917.32 CAD <br /> |
| Compare Prices | Latest Prices
|
| Manufacturer Part Number |
5240001 |
| Common Name | PH Pro |
| Release information
| |
| Product URL | External Product Link |
| Product Manual URL | External Product Link |
| Product Manual File | File Link |
| Has computer interface |
Serial |
| Firmware Upgrade Possible |
Yes |
| Predecessor | Powerhouse Pro |
| Successor | PH5 |
| Details
| |
| Max Current | 5 |
| Command Station | CS02 |
| See command station for additional features of this starter set. | |
History
NCE was a subcontractor to Wangrow Electronics, providing the software for their command stations and throttles.
The Powerhouse Pro was intended to be Wangrow's next DCC system, replacing the System One, but Wangrow declined. NCE decided to become a full DCC manufacturer and offered the system under their own name.
Early units shipped with a System One manual until a Powerhouse Pro specific edition was available. Later the name would be simplified to Power Pro.
Power Pro by NCE
The Power Pro is the only fully featured DCC system offered by NCE. It consists of the Pro Cab and a command station/booster.
The system was originally marketed as the Powerhouse Pro
This system is often confused with the Power Cab, whose throttle is similar in appearance. The difference is the Power Pro throttle offers more features as it is purely a throttle, with a standalone command station.
Features
- 5 and 10A Command Station/Boosters
- Five amp systems feature an integrated Power Pro (or PB105) command station/booster
- The PH10 systems consist of a PB110 command station and CS02 Powerhouse 10A booster
- Tethered or Wireless Throttles
- Expansion via Cab Bus
As this was intended to replace the System One, it has an RS-232 serial port for communication with a computer.
Walkaround Operation
The system is supplied with one Universal Throttle Panel. Adding additional UTP panels allows walkaround operation.
The CS02 command station supports up to 63 throttles (cabs).
Radio Throttles
The set can be purchased with optional radio capability, or this feature can be added later.
Expansion
Additional Cab Bus accessories can add features. As the Cab Bus supports a maximum of 63 cabs, each additional device reduces the number of cabs supported.
A Control Bus allows connection of additional boosters.
Programming Track
The CS02 offers a programming track output for multifunction decoders. Older models (pre 2007) may require a programming track booster.
Other Features
- Primary and Extended Address Support
- Extended Address Range: 1 to 9999
- Accessory Addressing: 1-2044
- Functions: 29
- Operations and Service Mode Programming
- NCE signal support
- Macros supported
- Fast Clock
5240001 FAQs
See Also
- NCE
- Wangrow
- Power Cab
- Cab Bus
- How to sort out non-responsive buttons on the NCE Pro Cab & Power Cab handsets