Product: DCS240
DCCWiki, a community DCC encyclopedia.
 |
There is a full list of command stations available. For help with terms, see the Terms List. |
Contents
Specifications
| General information | |||
|---|---|---|---|
| Common Name | DCS 240 | Manufacturer | Digitrax |
| Product URL | http://digitrax.com | Manual URL | |
| Integrated Throttle | None | Max Current | 8 |
| Computer Interface | Yes | Software Upgrade Possible | Yes |
| Communications BUS | LocoNet | Firmware Upgrade Possible | Yes |
| Separate Programming Track | Yes | ||
| DCC Features | |||
| Address Range | 2/4 | Max Simultaneous Trains | 400 |
| Support Consisting | Universal, Advanced | Max Consists | 127 |
| Speed Steps | 128 | Max Switches | 999 |
| Functions | 28 | Feedback | Ukn |
| Zero Stretching | Yes | Ops Mode Programming | true |
| Auto Shuffle Train / Signal Speed Control | Ukn | LocoNumberReadback | No |
| CV Readback | No | ||
Notes
- Unit must be returned to manufacturer for updating.
- Older units do not support functions F9 – F12
What references this product
None yet.
Other Command Stations made by same manufacturer
| ||||||||
5 or 8 Amps, depends on power supply and connection
400 Loco Addresses / 400 Throttles Supported.
Auto reset over temperature and short circuit protection
Hardware EZ routes and Loco Reset
Integrated USB for Computer Support
Over-Voltage Protected
Auto shutdown when command control signal is lost to prevent “runaway” trains