LokPilot 5 DCC/MM/SX/M4 (59616)

DCCWiki, a community DCC encyclopedia.
Jump to: navigation, search

Multifunction Decoder:

Electronic Solutions Ulm: LokPilot 5 DCC/MM/SX/M4 (59616)

Summary: The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. This decoder has a Marklin compatible 21MTC interface.

See more Multifunction Decoders
General information
Manufacturer Electronic Solutions Ulm
CV7 ID#
MSRP
Compare Prices Latest Prices
Product information
Manufacturer
Part Number 		59616

Common Name LokPilot 5 DCC/MM/SX/M4
Decoder Core Features Motor, Functions, Lights

Product URL External Product Link
Product Manual URL External Product Link
Predecessor
Successor
Hardware Information
Scales HO, O
Connection Method 6 Pin / NEM651
Length 21.4 mm2.14 cm <br />0.0214 m <br />0.843 in <br />0.0702 ft <br />
Width 15.5 mm1.55 cm <br />0.0155 m <br />0.61 in <br />0.0509 ft <br />
Height 4.5 mm0.45 cm <br />0.0045 m <br />0.177 in <br />0.0148 ft <br />
Continuous Amps
Max Amps
Voltage Range
General DCC Information
Extended Addressing Yes
AnalogConversion Yes
Speed Steps 14, 28/128
User Loadable Speed Table Yes
Back EMF Yes
Programming Modes Ops, Address, Direct, Paged, Register
Decoder Assisted Consists Yes
CV Readback
Silent Running (HF) Yes
Dither Yes
Kick Start Yes
Momentum Yes
Function Information
# of Functions 10
Function Amps 10 @ 250mA
# of Lighting Effects
# of Sound Effects
Programming Information
Programming Lock Yes
Decoder Programming Modes
Misc Items
SUSI Interface Yes
RailCom Yes
USP
Transponding
Has computer interface
Firmware Upgrade Possible Yes
UPC Number

The LokPilot 5 is a real multi-protocol decoder. Masters DCC, Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as Primary and Extended addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.

It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers.Auxiliary registers exist for control centers that can only program CVs from 1-255.

Motorola® users benefit from up to 28 speed steps with 255 addresses. ... A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.

The M4 protocol enables automatic registration at mfx®-compatible control centers.

The LokPilot 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is possible. ABC automatic shuttle train enables automatic commuting between two stations.

The LokPilot 5 decoder can be used on analog DC and AC railways. The decoder switches between the operating modes fully automatically "on-the-fly".

Features

Functions

Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each.In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. The brightness of each output can be set separately.

Motor

Motor control fefatures of the LokPilot 5 has been fundamentally improved again. Adjustable PWM frequency from 10kHz to 50kHz ensures super quiet operation. The load control can now be adapted to difficult cases with up to 10 CVs. "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 1.5A motor current, the LokPilot 5 decoder provides enough juice even for older motors.

59616 FAQs

  • No FAQs link to this page.

See Also

Related Electronic Solutions Ulm Multifunction Decoders

... further results

Retrieved from "https://dccwiki.com/w/index.php?title=59616&oldid=44182"