LokSound 5 L DCC/MM/SX/M4 (58315)

DCCWiki, a community DCC encyclopedia.
Jump to: navigation, search

Multifunction Decoder:

Electronic Solutions Ulm: LokSound 5 L DCC/MM/SX/M4 (58315)

Summary: LokSound 5 L is intended for applications where the required power exceeds the limits of LokSound 5. Ideally these are O Gauge vehicles and smaller 1 Gauge locomotives.

See more Multifunction Decoders
ESU decoder 58315 LokSound-5 product-image.webp
General information
Manufacturer Electronic Solutions Ulm
CV7 ID#
MSRP 214.99 USD218.86 EUR <br />191.49 GBP <br />324.91 AUD <br />290.04 CAD <br />
Compare Prices Latest Prices
Product information
Manufacturer
Part Number
58315

Common Name LokSound 5 L DCC/MM/SX/M4
Decoder Core Features Motor, Functions, Lights, Sound

Product URL External Product Link
Product Manual URL External Product Link
Predecessor
Successor
Hardware Information
Scales O
Connection Method Vendor Connector
Length 50.8 mm5.08 cm <br />0.0508 m <br />2 in <br />0.167 ft <br />
Width 25.4 mm2.54 cm <br />0.0254 m <br />1 in <br />0.0833 ft <br />
Height 14 mm1.4 cm <br />0.014 m <br />0.551 in <br />0.0459 ft <br />
Continuous Amps 3
Max Amps
Voltage Range
General DCC Information
Extended Addressing Yes
AnalogConversion Yes
Speed Steps 14, 28/128
User Loadable Speed Table Yes
Back EMF Yes
Programming Modes Ops, Address, Direct, Paged, Register
Decoder Assisted Consists Yes
CV Readback Yes
Silent Running (HF) Yes
Dither Yes
Kick Start Yes
Momentum Yes
Function Information
# of Functions 11
Function Amps
# of Lighting Effects
# of Sound Effects
Programming Information
Programming Lock Yes
Decoder Programming Modes
Misc Items
SUSI Interface Yes
RailCom Yes
USP
Transponding
Has computer interface
Firmware Upgrade Possible Yes
UPC Number

LokSound 5 L

Like all products of the LokSound family the LokSound 5 L is a true multi-protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4.

Features

It supports 14 through to 128 speed steps as well as 2- and 4-digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus the decoders register themselves fully automatically on suitable command stations.

Supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®.

  • There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.
  • ZIMO HLU braking
  • Lenz® ABC system
  • Braking with DCC brake generators or with DC is also possible
  • The ABC push-pull feature enables automatic commuting between two stations

The LokSound 5 L decoder is also suitable for analogue DC and AC layouts.

Sound

The LokSound 5 L decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz. The huge 128 MBit sound memory assures sufficient storage capacity.

The volume of all individual sounds may be adjusted separately. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

Functions

Eleven amplified function outputs.

  • Six logic outputs
    • Control two RC servos or SUSI extension modules.
  • All the important lighting functions are supported.
  • The brightness of each output may be adjusted separately.

Motor Control

Motor control of the LokSound 5 L has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors.

Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases.

The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.

The LokSound 5 L decoder supplies ample current for the motor, up to 3.0 A.

58315 FAQs

  • No FAQs link to this page.

See Also

Articles Referencing this Page

See more results...

Related Electronic Solutions Ulm Multifunction Decoders