LokSound 5 micro DCC (58823)

DCCWiki, a community DCC encyclopedia.
Jump to: navigation, search

Multifunction Decoder:

Electronic Solutions Ulm: LokSound 5 micro DCC (58823)

Summary: The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. One of the smallest LokSound decoders, it should fit all N gauge and TT vehicles, also suitable for small H0 vehicles.

See more Multifunction Decoders
ESU decoder LokSound 58823.jpeg
General information
Manufacturer Electronic Solutions Ulm
CV7 ID#
MSRP 114.99 EUR112.96 USD <br />100.61 GBP <br />170.71 AUD <br />152.39 CAD <br />
Compare Prices Latest Prices
Product information
Manufacturer
Part Number
58823

Common Name LokSound 5 micro DCC
Decoder Core Features Motor, Functions, Lights, Sound

Product URL External Product Link
Product Manual URL External Product Link
Predecessor
Successor
Hardware Information
Scales HO, N, OO, TT, Z
Connection Method Wire Leads
Length 21 mm2.1 cm <br />0.021 m <br />0.827 in <br />0.0689 ft <br />
Width 10 mm1 cm <br />0.01 m <br />0.394 in <br />0.0328 ft <br />
Height
Continuous Amps 0.75
Max Amps
Voltage Range
General DCC Information
Extended Addressing Yes
AnalogConversion Yes
Speed Steps 14, 28/128
User Loadable Speed Table Yes
Back EMF Yes
Programming Modes Ops, Address, Direct, Paged, Register
Decoder Assisted Consists Yes
CV Readback Yes
Silent Running (HF) Yes
Dither Yes
Kick Start Yes
Momentum Yes
Function Information
# of Functions 6
Function Amps
# of Lighting Effects
# of Sound Effects
Programming Information
Programming Lock Yes
Decoder Programming Modes
Misc Items
SUSI Interface
RailCom Yes
USP
Transponding
Has computer interface
Firmware Upgrade Possible Yes
UPC Number

Details

The LokSound 5 micro DCC is made for the North American and Australian markets. It does not come with a speaker.

This decoder supports all DCC programming modes and thanks to RailCom® it may read out the CV values on the main, provided the command station supports RailCom.

The decoder supports ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore, the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. An ABC push-pull feature enables the automatic commuting between two stations.

Sound

Up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz. A double class D audio power amplifier with up to 3W output power feeds the speakers (4 – 32 Ohms).

The huge 128 MBit sound memory assures sufficient storage capacity.

The volume of all individual sounds may be adjusted separately. Three separately adjustable braking functions and two alternative load scenarios provide maximum control.

Functions

Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs plus one logic output.

There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos.

All the important lighting functions are supported. The brightness of each output may be adjusted separately.

Motor control

  • Variable PWM frequency from 10 kHz to 50 kHz assures silent operation, particularly for coreless motors.
  • Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases.
  • The Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor.
  • Motor current up to 0.75 A for the intended applications.

58823 FAQs

  • No FAQs link to this page.

See Also

Articles Referencing this Page

See more results...

Related Electronic Solutions Ulm Multifunction Decoders