DS78V
DCCWiki, a community DCC encyclopedia.
Stationary Decoder:
Digitrax: DS78VSummary: The DS78V accessory decoder can control eight for 2-position Slow-motion turnout motors or 3-position semaphores. It communicates using LocoNet, which allows full programmability when installed on the layout.
See more Misc DCC Items | |
---|---|
General information | |
DCC Category Stationary Decoder | |
Manufacturer | Digitrax |
MSRP | 85 USD86.53 EUR <br />75.71 GBP <br />128.46 AUD <br />114.67 CAD <br /> |
Compare Prices | Latest Prices |
Manufacturer Part Number | |
Common Name | |
UPC Number | 5266708010 |
Release information | |
Product URL | Product Link |
Manual URL | Manual Link |
Has computer interface | |
Firmware Upgrade Possible | |
Year Released | 9/2021 |
Year EOL | |
Predecessor | |
Successor | |
Misc Details | |
Height | 2727 cm <br />270 mm <br />0.27 m <br />10.63 in <br />0.886 ft <br /> |
Length | 9999 cm <br />990 mm <br />0.99 m <br />38.976 in <br />3.248 ft <br /> |
Width | 6767 cm <br />670 mm <br />0.67 m <br />26.378 in <br />2.198 ft <br /> |
DS78V
DS78V Stationary Servo Decoder
Eight 9G servo decoder for 2-position slow-motion turnouts.
- Configurable to control eight 3-position semaphores.
- 16 System Routes, with EZ-Route setup.
- Routes remotely editable using DT602 with latest software.
- 16 input lines for Switch and Detection inputs.
- Supports two DSXC4 input connector boards and cables.
- Supports two BD4N’s for block detection reporting.
- Supports 8 DSXCP1 Fascia control and direction indicators.
- Supports DSXCP1 indicating ‘servo in motion’.
- Optional DCC track input for limited feature capabilities.
DSXSV9
9G mini servo system for turnout or motion control.
Additional Information
The servo angles can be ajusted, see KB1072: Extra DS78V servo setup information for complete details.
This allows adjustment of the thrown and closed positions of the servos, as well as semaphore blade positions.
DS78V FAQs
- No FAQs link to this page.
See Also